Product Description
TI Automotive F90000285 Fuel Pump
The F90000285 (aka the "Walbro 470 or 525" or "Hellcat Pump") is one of our highest performing fuel pump that we offer for in-tank applications. This pump is identical in form factor to the F90000267 and F90000274, but has a slightly higher output. Like the F90000274, this fuel pump has a high pressure relief valve for high boost applications. Due to the additional heat this pump generates, we generally recommend this fuel pump be used as a secondary pump in conjunction with a F90000274 primary; however, it may be used as a primary pump for demanding applications.
- Compatible with gasoline, race gas, and ethanol blends up to E99, as well as race gas/ethanol blends
- Able to operate up to 112 psi total fuel pressure
- Internal check valve for use in staged (or non-staged) fuel systems
- Dual channel turbine pump for very quiet operation
- Comes with fuel safe sealed Delphi electrical connector
- Requires Walbro prefilter on inlet (recommend Walbro 125-190)
- Fuse each pump at 30A
- Not recommended for methanol fuels
- Made in USA by TI Automotive
Carefully consider whether your fuel system is capable of supporting this pump before attempting to implement into a pre-existing fuel system that utilizes a smaller pump. Upgrades/changes may include electrical, filtration, fuel pressure regulation, and fuel line sizes.
SPECIFICATIONS
- See performance chart in product images
- Outlet diameter: 10mm (3/8")
- Diameter (upper body) 39mm
- Diameter (lower body) 50mm
- Length (inlet-outlet tips) 130.6mm
- Fuse at 30A
