Product Description
ReadyLift 2.25" Rear Block Kit - 14-24 Silverado & Sierra
PART NUMBER: 66-3002
Chevy/GMC 2" OEM Style Cast Iron Rear Block Kit. Includes new u-bolts and hardware. Fits 1999-2018 GM 1500 trucks. Not for use on 1999-2018 GM 1500 trucks with the composite rear overload. May require longer shocks or shock extension 67-3809
DETAILS
ReadyLIFT OEM-style rear block kits are available for model specific applications. These Rear Block Kits include two (2) 2.25" Rear Blocks, four (4) E-Coated U-Bolts, eight (8) Nuts and Washers and will safely lift the rear of your truck an additional 1" to 3" depending on the application. Based on OEM designs and never made out of light weight extrusions our 2.25" GM Blocks are made from cast iron and have anti-rotation ears built-in. Fits 1999-20218 classic and current body style 6-lug model GM trucks. 2007-2018 2WD and 4WD trucks with OEM 1.25" blocks will want to take advantage of the additional 1" of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25" which, when removing the factory 1.25" block, results in 1" of increased rear lift. 1999-2006 2WD trucks [which have no rear block] will to take advantage of 2.25" lift using the 66-3002 ReadyLIFT Rear Block Kit. This kit eliminates the dangers of having to stack blocks which may be illegal in some states. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. Like all ReadyLIFT products these block kits come with our Lifetime Warranty. Every ReadyLIFT Rear Block Kit comes complete with one pair of OEM- quality e-coated cast iron rear blocks, model and size-specific U-bolts, hardware and instructions. Note: 2019-UP trucks may need to trim off excess bolt length after installation. Note: Not for use on 2019-2022 GM 1500 trucks with the composite rear overload. Note: This GM 1500 kit is NOT COMPATIBLE with vehicles equipped with rear composite mono-leaf springs. The mono-leaf is easily identifiable ‚¬ the U-bolt is round/circular around the top of the leaf spring. This kit only works with vehicle equipped with traditional steel leaf springs ‚¬ identified by ‚¬Ëœsquare‚¬„ U-bolts.
INSTALLATION
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.
INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.
INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.
