Product Description
PNR Welding - 09-15 CTS-V Sedan Trunk Tank
PUMP OPTIONS;
- Rule 2000 Internal Pump
- Davies Craig DC150 External Pump
- Stewart EMP External Pump
- Pierburg CWA400 External Pump
Intercooler tanks for the CTSV Sedan. These come in 5, 7 and 8 gallon intercooler tanks with the option to add a internal or external pump.
The install kits work with the factory supercharger and upgraded superchargers.
Each install kit will come with two choice of fittings of your choice, (12an and 3/4" work with the factory and aftermarket superchargers. 12AN is a fancy version of the 3/4". The 1" and 16AN is usually for turbo and centrifugal supercharged, or modified intercoolers.) 50 feet of safety insulated heat hose that is made for this purpose, nylon clamps, insulated straps to hang hose, relay and inline fuse for all pumps, a brass ball valve and drain setup, stainless hardware for everything.
ATT: EMP pump purchasers. When using the 12an or 3/4" hose and install kit, the pump recommends a 1" or 16an feed. So the 2 feet of 1 inch hose with the reducer to 12an or 3/4" is highly recommended. Feed port should be 1" or 16an. Return should be same size as your intercooler and heat exchanger. Both 3/4" and 12an will work with factory OEM.
When purchasing with EMP pump with factory intercooler/brick choose 16an feed, 12an return, 12an hose and install kit. Straight or 90* fittings are your preference.
Black and red cap will NOT fit flush on the 8 gallon with the rule 3700. The cap is raised about 1" too high for it to fit flush. The black and clear one fits flush.
~1-2 WEEK BUILD TIME
