Product Description
Fore Innovations - 09-15 Cadillac CTS-V (LSA) - Triple Pump Fuel System
LEVEL 2
We do not recommend this configuration with LSA, LS9 (or related) blowers unless the customer is willing to cut off the tabs on the back of the OE blower housing in order to install conventional fittings. (not the LP 180s)
1800+ rwhp capable return fuel system with efficient hose routing. The rails are in a series installation with the fuel pressure regulator AFTER the rails. We recommend this setup for centrifugal and turbo setups.
1800+ rwhp capable return fuel system with efficient hose routing. The rails are in a series installation with the fuel pressure regulator AFTER the rails. We recommend this setup for centrifugal and turbo setups.
INCLUDES
- CTS-V2 Fuel Pump Module (triple pump)
- 88mm Inline Fuel Filter
- F2i Fuel Pressure Regulator
- FCV Checkvalve
- All fittings, hose, and hardware necessary to complete typical fuel line plumbing
-30 feet of fuel line (your choice)
-Qty 10, billet compression style hose ends
-Qty 7 billet low profile 90 degree AN to o-ring fittings
-Qty 3 billet straight AN to o-ring fittings
-Qty 1, billet o-ring plug
-Qty 1, billet 1/8 NPT plug
-Qty 10, hose straps with stainless mounting screws
-Qty 10, billet compression style hose ends
-Qty 7 billet low profile 90 degree AN to o-ring fittings
-Qty 3 billet straight AN to o-ring fittings
-Qty 1, billet o-ring plug
-Qty 1, billet 1/8 NPT plug
-Qty 10, hose straps with stainless mounting screws
LEVEL 3
1800+ rwhp capable return fuel system made with top shelf components. The feed line enters our F4i regulator, then distribution lines feed to the rear of both fuel rails.
INCLUDES
- CTS-V2 Fuel Pump Module (triple pump)
- F4i Fuel Pressure Regulator
- 88mm Inline Fuel Filter
- FCV Checkvalve
- All fittings, hose, and hardware necessary to complete typical fuel line plumbing
-30 feet of fuel line (your choice)
-Qty 10, billet compression style hose ends
-Qty 7, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billet straight AN to o-ring fittings
-Qty 3, billet o-ring plugs
-Qty 10, hose straps with stainless mounting screws
-Qty 1, 1/8 NPT plug
-Qty 10, billet compression style hose ends
-Qty 7, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billet straight AN to o-ring fittings
-Qty 3, billet o-ring plugs
-Qty 10, hose straps with stainless mounting screws
-Qty 1, 1/8 NPT plug
LEVEL 4
Boost Referenced Return System for 1800+ rwhp. Feed line is split with y-block to enter rear of rails. Regulator is mounted after customer supplied rails. Return line back to tank.
INCLUDES
- CTS-V2 Fuel Pump Module (triple pump)
- 2-1 Y-block
- F2i Fuel Pressure Regulator
- 88mm Inline Fuel Filter
- FCV Checkvalve
- All fittings, hose, and hardware required for typical fuel line plumbing
-30 feet of fuel line (your choice)
-Qty 14, compression style billet hose ends
-Qty 8, billet low profile 90 degree AN to o-ring fittings
-Qty 6, straight AN to o-ring fittings
-Qty 10, hose straps with stainless mounting screws
-Qty 1, 1/8 NPT plug
-Qty 14, compression style billet hose ends
-Qty 8, billet low profile 90 degree AN to o-ring fittings
-Qty 6, straight AN to o-ring fittings
-Qty 10, hose straps with stainless mounting screws
-Qty 1, 1/8 NPT plug
