Anderson Composites Type-SA Fiberglass Trunk Lid w. Integrated Spoiler - 15-23 Ford Mustang S550

Type-SA fiberglass decklid with integrated spoiler for 2015 - 2023 Ford Mustang
  -Fits Bullitt, EcoBoost, EcoBoost Premium, GT, GT Premium

*Mounts with OE hardware

*Does not have holes drilled for wiring harness or panel (dimples are present for drilling)

*Backup camera mount will need to be relocated from the OE black plastic taillight panel to the inside of the fiberglass trunk, this may require custom work 

*Check camera mount opening, excess resin may need to be sanded for proper fit, do not force camera into opening

*Does not fit convertible model 

*Hand crafted; approximate weight 17.0 lbs. (OE decklid weighs 21.0 lbs.)

*Shipped via ground truck freight only

*Requires normal pre paint prep; including sanding and primer.  Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component

*Do not push hard on surface when sanding.  Do not bake with paint curing lamp, allow to cure with ambient air temperature  

*Please be sure to review our Terms and Conditions before placing your order.

WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.